1928 chevy running better

1928 Chevy first drive video

1928 Chevy transmission video

My Chevy is not humming along

I think I need to book in for a service.

Slight leak in the radiator and the front wheel alignment is a bit out.

Horn not working also

!928 Studebaker restoration by Finch Restorations - Part 5

Finch Restorations in Mounty Barker South Australia have started a full restoration on a 1928 Studebaker.

Below progress continues in part 5

I thought my 28 Chev ute chassis was bad? These guys are true craftsmen.

Matlida the 28 Chev - now back on the straight and narrow

For some time both Terry (Matilda's owner) and I have thought the old girl was running a bit rough, and on the recent Chev 4 Tour at Shepparton, despite Matilda cruising at a good speed, to me it sounded a bit sick. I was worried a burnt valve may be the culprit.

We had a session to get to the bottom of the problem...... good news or bad.

First thing was to eliminate a valve problem with a compression test. All cylinders were around 60 to 65 psi, happy with that.

Next was to check and adjust the tappets, more a noise problem than being the cause of a sluggish Matilda. They were nearly all out, so adjusted and ticked that of the list. Used this magical Snap On tool that I found on Ebay a few years back, makes setting tappets a dream instead of the normal nightmare.

I was starting to think it was a carby problem...... until I cleaned and checked the points. They were a bit burnt and the gap was about 35 thou. Reset at 23 thou and bingo, Matilda is now behaving herself, running as smooth as a Chev 4 can run.

Who is a happier (and relieved)  Chev owner now?

Another Chev 4 saved

A friend of mine recently purchased the remains of a 27 Chev for a very good price, and saved it from the scrap metal yard.

A lot of work ahead, but a pretty good starting point, as the chassis appears to be in very good condition.