Kev's Chev - Another 1928 Aussie Chev being restored - Update 9th March 2015

To see the earlier postings of this ongoing restoration, click on the link

http://my28chev.blogspot.com.au/2015/01/kevs-chev-another-aussie-28-tourer_50.html

The latest update as at 9th March 2015 is posted below

Engine was cleaned and the old paint stripped off

Gearbox pre stripping

Cluster gears and bottom shafts in very good condition

Gear selector repaired and top tower pins replaced

New fully sealed front and rear bearings fitted and bronze bushing between input and output shaft

All back together ready to paint

After removing head have decided to have block bored out to 30 thou oversize and fit new pistons and rings

Head is good with new valves fitted

Original pistons. Bearings and lifters are serviceable and will be reused

My home made spray booth ready for work with the stripped chassis prior to sending away for sandblasting

The old paint looked ok  but peeled off 

Sandblasted and ready for painting

The painting process has began.

Next was the Gearbox

And at last the chassis, which came up very nice indeed.

Now let the assembly of this Chevy begin...............